WSEAS

Proceedings of the WSEAS and IASME Conference:

3rd IASME/WSEAS Int. Conf. on HEAT TRANSFER, THERMAL ENGINEERING & ENVIRONMENT

Program

Papers

Books and Journals

Committee

Reviewers

Back to Main Page

EDITORS:

Assc. Professor Ibrahim Hassan
Concordia University, CANADA

Dr. Nikolai Kobasko
Cleveland, Ohio 44143-2930, USA

ASSOCIATE EDITORS:

Mario Misale (ITALY)
Jinliang Xu (CHINA)
Jurij Krope (SLOVENIA)
Hamzeh Duwairi (JORDAN)

Advisory Committee and Honorary Members:

Prof. Shabaan Abdallah, University of Cincinnati, Ohio, USA
Prof. Oleg V. Vasilyev, University of Colorado, CO, USA, Oleg.Vasilyev@Colorado.edu
Prof. Shoaib Usman, University of Missouri-Rolla, USA
Prof. Bozidar, Liscic, President of IFHTSE, Zagreb, CROATIA, bliscic@fsb.hr, www.ifhtse.org
Prof. Tatsuo Inoue, Head of the Department at Kyoto University, Kyoto, JAPAN, inoue@energy.kyotou.ac.jp
Prof. Michiharu Narazaki, Utsunomiya University, Utsunomiya, Tochgi, JAPAN, narazaki@cc.utsunomiyau.ac.jp
Dr .George Totten, Ex-President of IFHTSE, USA, GETotten@aol.com, www.ifhtse.org
Dr. Lynn Furgeson, President of Deformation Control Co, USA, Lynn.Furgeson@DeformationControl.com
Prof. Boris Ushakov, Head of department, State Metallurgical Univ. in Moscow, RUSSIA mgvmimail@mtunet.ru
Prof. Pavel Krukovsky, Head of the dept. Ukran. Nat. Academy of Sciences, Kiev, UKRAINE, kruk@i.kiev.ua
Prof. Gareth Thomas, University of California, Berkeley, CA, USA, garth@uclink2.berkeley.edu
Prof. Tamas Reti, Polytechnic of Budapest, Dept. of Materials and Technology, HUNGARY, reti@zeus.banki.hu
Dr. Valery Rudnev, Group Director Sci. & Techn., INDUCTOHEAT, Michigan, USA, RUDNEV@INDUCTOHEAT.COM
Prof. Claudia del Carmen Gutierrez-Torres, National Polytechnic Institute, Mexico, claudiat@cedar.ne.tamu.edu

Members:

Prof. Mario Misale, Universitat degli Studi di Genova, ITALY
Prof. Hyung Hee Cho, Chairman of the School of Mechanical Engineering, Yonsei University, Seoul, KOREA
Prof. K. P. Sandeep, North Carolina State University, USA
Prof. Jing Liu, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing , P. R. CHINA
Prof. Aly Elshamy, Menoufia University, EGYPT
Prof. Rafael Royo, Universidad Politecnica de Valencia, SPAIN
Prof. Slawomir Smolen, Hochschule Bremen University, GERMANY
Prof. Junjie Gu, Dept. of Mechanical and Aerospace Engineering, Carleton University, Ottawa, CANADA
Prof. C. J. Ho, Department of Mechanical Engineering, National, Cheng Kung University, Tainan, TAIWAN
Prof. Pradip Majumdar, Northern Illinois University, USA
Prof. Ivan Kazachkov, Royal Institute of Technology, Stockholm, SWEDEN
Prof. Jeong-se Suh Gyeongsang, National University, KOREA
Prof. Abul-Fazal M. Arif, King Fahd University of Petroleum & Minerals, Dhahran, SAUDI ARABIA
Prof. B. Zeghmati, Université de Perpignan, Cedex, FRANCE
Prof. Yizhen Huang, Shanghai Jiaotong University, CHINA
Prof. Asad Salem, Cleveland State University, USA
Prof. Suman Chakraborty, Indian Insititute of Technology, Kharagpur INDIA
Prof. Ahmed Mohammadein ,Aswan Faculty of Science, EGYPT
Prof. Joakim Wren, Linköping University, SWEDEN
Prof. Agis Papadopoulos, Aristotle University Thessaloniki, GREECE
Prof. Hany Mohamed, Assiut University, EGYPT
Prof. Chin-Hsiang Cheng, Department of Mechanical Engineering, Tatung University, Taipei, TAIWAN
Prof. Siavash Sohrab, Northwestern University, Evanston USA
Prof. Aydin Misirlioglu, Istanbul Technical University, TURKEY
Prof. Valeri Bubnovich, Universidad de Santiago, CHILE
Prof. Dragoljub Mirjanic, University of Banja Luka, BOSNIA AND HERZEGOVINA
Prof. Hossein Shokouhmand, University of Tehran, IRAN
Prof. Ramil Sharafutdinov, Bashkir State University, Bashkortostan RUSSIA
Prof. Bouhadef Khedidja, Laboratoire des Transports Polyphasiques et Milieux Poreux, ALGERIA
Prof. Sujoy Kumar, Saha Bengal Engineering College, INDIA
Prof. Günter K.F., Bärwolff Inst. of Mathematics, Berlin, GERMANY
Prof. Kadir Bilen, Ataturk University, Department of Mechanical Engineering, Erzurum,TURKEY
Prof. Federico Mendez, Universidad Nacional Autonoma de Mexico, MEXICO
Prof. Yinping Zhang, Tsinghua University, P.R. CHINA
Prof. Ataman Haksever, Dean, Trakya University Çorlu, TURKEY
Prof. C.W. Leung, The Hong Kong Polytechnic University, HONG KONG
Prof. M. Abu-Zaid, Faculty of Eng. , Mutah University, JORDAN
Prof. Somchai Wongwises, King Mongkut's University of Technology Thonburi, THAILAND
Prof. Chun-I Chen, I-Shou University, TAIWAN
Prof. Mohd Al-Nimr, Jordan University of Science and Technology, JORDAN
Prof. Mehmet C. Ece, Trakya Universitesi, Edirne, TURKEY
Prof. Md Anwar, Hossain University of Dhaka, BANGLADESH
Prof. Ali J. Chamkha, The Public Authority for Applied Education and Training, Shuweikh, KUWAIT
Prof. C. Treviño, Facultad de Ciencias, UNAM, MEXICO
Prof. Aroudam El hassan, Dept. of Physics, Faculty of Sciences, Tetouan, MAROCCO
Prof. P V S N Murthy, Department of Mathematics, Indian Institute of Technology Kharagpur, West Bengal, INDIA
Prof. Berrin Erbay, University of Osmangazi, TURKEY
Prof. Halina Garbalińska, Technical University of Szczecin, POLAND
Prof. Filino Harahap, Institute of Technology of Bandung, INDONESIA
Prof. H.S. Takhar, Manchester Metropolitan University, UK
Prof. Federico Mendez, Universidad Nacional Autonoma de Mexico, MEXICO
Senior Lecturer Dr. Govind Mahehswari, Institute of Engineering & Technology, INDIA
Senior Lecturer Dr. Navaneethakrishnan, P. Kongu Engineering College, INDIA
Lecturer Dr. Sukhwinder Kaur, Bhullar Panjab University, Chandigarh, INDIA
Lecturer Dr. Nasir Mohd Agos, Salim Universiti Teknologi, Mara, MALAYSIA
Lecturer Dr. T.M. Indra Mahlia, University of Malaya, Kuala Lumpur, MALAYSIA
Lecturer Dr. Gamal Mohamed, University of Benha, EGYPT
Lecturer Dr. Himanshu Narayan, National University of Lesotho, LESOTHO
Lecturer Dr. Nehma Lotfy, University of Benha, EGYPT
Lecturer Dr. Mostafa Ahmad, University of Benha, EGYPT
Dr. Gheorghe Juncu, Politehnica University Bucharest, ROMANIA
Dr. Mohammad Riaz Moghal, University College of Engineering and Technology, Mirpur, PAKISTAN
Dr. Sahar Abdel-Gaied, Assiut University, EGYPT
Dr. Kazuhiro Endo, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, JAPAN
Dr. Mohamed El-Amin, University of Stuttgart, GERMANY
Dr. Liza Lam, University of Southampton, UK
Dr. Xiaofeng Peng, Tsinghua University, P.R. CHINA
Dr. Nikolay Sokolov, Research Institute of machine building, RUSSIA
Dr. Anders Holmbom, Mid Sweden University, Östersund, SWEDEN
Dr. Jinliang Xu, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou, P.R. CHINA
Dr. Eduard Yanukyan, Pyatigorsk State Technological University, Pyatigorsk, RUSSIA
Dr. Nidal Abu-Hamdeh, Jordan University of Science and Technology. JORDAN
Dr. Mohamed Ali, King Saud University, Mechanical Engineering Department, Riyadh, SAUDI ARABIA
Dr. Hamzeh Duwairi, Faculty of engineering and Technology, Amman, JORDAN
Dr. Vladimir Kondrashov, RUSSIA