PROGRAM
5th
WSEAS International Conference on
INSTRUMENTATION, MEASUREMENT,
CIRCUITS and SYSTEMS (IMCAS '06)
Hangzhou, China,
Sponsored by WSEAS and WSEAS Transactions
Co-Organized by WSEAS and Zhejiang University of Technology
April 16-18, 2006
Sunday, April 16, 2006
INTRODUCTION
Welcome Speech by the President of Zhejiang University of Technology
Plenary Lecture I
From Sensorimotor Skills to Cognitive Technical Systems - an Incremental
Learning Approach
Jianwei Zhang
Professor and
Director,
Institute of
Technical Aspects of Multimodal Systems (TAMS)
Department of
Informatics, University of Hamburg, Germany
Abstract:
Recently, new applications of intelligent systems like service robots and
cognitive automobiles have been emerging. The success of these new applications
will mainly lie in their ability to incrementally learn through interaction with
their environment and with humans. Advances have been made both in interacting
with the environment through the development of elementary sensorimotor skills
as well as in human-machine interaction via improved social skills. In this
talk, I will first give an overview of the hierarchy of robot skills and the
important human-machine interaction modalities. Then I will introduce the
incremental-learning approaches to developing self-valued, multisensor-based
robot skills. Interactive-assembly experiments in which a robot is instructed
using natural language, gesture and gaze information will also be discussed.
Finally, I will summarize the future research topics such as context-awareness,
ambient sensing, autonomous credit-assignment, cognitive architecture and
cross-modal integration.
Plenary Lecture II
Functionality integration in analytical microfluidic devices
Yong Chen
Ecole Normale
Supérieure, 24 rue Lhomond, 75005 Paris, France
Laboratoire de
Photonique et de Nanostructures, CNRS, 91460 Marcoussis, France
(http://www.ens.fr,
http://www.lpn.cnrs.fr)
Nanotechnology has been much promoted during the last few years. While the
universal goal of this development, like any others, is the capability
enrichment of human beings, nanotechnology is the pathway to understand and
explore material and living systems at molecular levels. This could be only
possible by matching both top down (miniaturisation) and bottom up (auto-organisation)
approaches which is highly interdisciplinary. One of the challenges is to
develop new methods and new instruments for chemical and biological processing
at micro and nano-scales. Microfluidic devices are such emerging systems which
can be manufactured at low cost and high throughput, with the manner of the
production of microelectronic circuits.
During the
past few years, many efforts have been devoted to the demonstration of
microfluidic device capabilities of doing the same works as can be done using
desktop equipments. It is known that new phenomena and un-known physicochemical
properties can be observed if the dimension of the integrated features is
reduced to a nano-meter scale. From this point of view, it is more interesting
to explore new potentialities offered by micro and nanostructures patterning
techniques. In all cases, microfluidic principles have to be applied as soon as
possible to the advanced research topics in biochemistry, in biology and in
biomedical research areas. By doing so, we enjoy a number of interdisciplinary
studies that also have great industrial interests.
In this talk, we will review our approaches based on low cost and high
throughput nanofabrication technologies. We will show how microfluidic chips can
be used to create new functionalities for single cell and single molecule
analyses and how fundamental physics knowledge can be applied to biochemical and
biological processing. Our long term research strategy will be also discussed
concerning bio-nano-info-cognitive (BNIC) convergence recently developed in both
ENS and LPN laboratories.
Plenary Lecture III
Laser based micro
CAD/CAM system
Wenhao Huang
Department of
Precision Machinery and Precision Instrumentation,
University of
Science and Technology of China, Hefei, 230026, P. R. China
Email:
whuang@ustc.edu.cn
CAD and CAM systems
have been widely used in industry all over the world. The emerging micro and
nano CAD/CAM systems are still in the incipient stages of scientific research
and development. However, the developing speed of these systems are quite high,
especially in micro and nano engineering field.
There are two basic
important issues featuring the micro and nano CAD/CAM systems. The one is that
new concepts and new principles are adopted in these systems. The other is the
interdisciplinary fusion. So the clever and well trained scientists and
researchers are facing great chances and challenges.
In this research, a
femto second laser based micro and nano CAD/CAM system is introduced. The two
photon exciting non-linear effect, Ti-sapphire fs laser, the confocal
microscope, 3D scanner and the design/manufacturing software are presented. The
main advantages of this system are discussed. Some functional micro devices such
as micro gears, 3D photonic crystals, micro lens array are demonstrated by our
micro CAD/CAM platform. Several important aspects such as the fabricating
resolution, scanning parameters and the performance of the devices are evaluated
theoretically and experimentally.
SESSION:
Frequency - Spectral
Analysis and
Measurement
Chair:
Shyue-Kung Lu,
Tanglong Chen
|
Frequency-Domain Analysis of Non-Linear Circuit Elements |
Horia Andrei, Fanica Spinei, Costin Cepisca, Valentin
Dogaru, Sorin-Dan Grigorescu, Nicolae Jula |
531-388 |
|
Optimal allocation and design of PSSs for damping of
low-frequency oscillations in an interconnected power system |
Liu Chun, Yokoyama Ryuichi, Ishimaru Masachika |
531-610 |
|
Development of an Efficient Algorithm for Fetal Heart Rate
Detection: A Hardware Approach |
M. I. Ibrahimy, M. B. I. Reaz, M. A. Mohd Ali, T. H. Khoon,
A. F. Ismail |
531-298 |
|
A distance protection algorithm based on recursive minimum
mean-square estimation |
Francesco Muzi |
531-312 |
|
Higher-order spectral characterization of low-level emissions in Wood using
Ultrasonic-Piezoelectric Transducers |
J. de la Rosa, I.Lloret, C.Puntonet J.Gorriz |
531-378 |
SESSION:
Testable Design Techniques and
Detecting Instrument
Chair:
Francesco Muzi,
Carlos G. Puntonet
|
Sysmatic analysis of OCS testing data |
Tanglong Chen, Jian Xiao |
531-593 |
|
Testable Design Techniques for Variable Block Size Motion Estimator Used in
H.264/AVC |
Po-Yu Yeh, Bo-Yuan Yeh, In-Yi Cheng, Sy-Yen Kuo, Shyue-Kung Lu |
531-460 |
|
Efficient Built-In Self-Test Techniques for Sequential Fault
Testing of Iterative Logic Arrays |
Shyue-Kung Lu, Mao-Yang Dong |
531-577 |
|
A Vibration Detecting Instrument Integrated with a Network
Transfer Capability |
S.-S. Lin, Huay Chang, Cheng-Chien
Kuo, Yong Su |
531-510 |
|
Detecting assembling quality of Razor Based on the machine vision
system |
Zhongfei Wang, Shiming Ji, Li Zhang,
Yanghui Huan, Guang Yang |
531-435 |
|
An In-process Machine Vision Detecting System in Continuous
Machining |
Qiaoling Yuan, Shiming Ji, Yi Xie, Li Zhang, Wei Fan,
Mingsheng Jin |
531-458 |
Monday, April 17, 2006
SESSION:
Instrumentation
and Measurement
Chair:
Manuel A. Duarte-Mermoud, Sarawut Sujitjorn
|
|
J. Y. Kim,Y. I. Lee, K. J. Kim, S. W. Nam, C. C. Ko |
531-233 |
|
New acoustical techniques for measuring spatial properties in
concert halls |
Lamberto Tronchin, Valerio Tarabusi |
531-360 |
|
Effect of
Limited Modal and Noise Information on Structural Damage Detection |
J. Alberto
Escobar, Ramses Rodriguez, Roberto Gomez |
531-699 |
|
Study
of storage yard PRIC key technologies based on modern measurement and
control |
Changan Ji, Xiubin Zhang, Junhao Ying, Yi Wang, Guohui
Zeng |
531-365 |
|
Design and implementation of micro inertial measurement system |
Jie Li, Jun Liu, Wendong Zhang |
531-632 |
|
Measuring Moment of Inertia Based on Identification of Nonlinear
System Featuring Naught Excitation |
Wen Hou |
531-650 |
|
Deceleration Measurement for Penetration into Steel Target |
Wendong Zhang, Jijun Xiong, Lujiang
Chen, Youchun Ma, Zhi-Qiang Feng |
531-646 |
|
An IPSO Based Integrated Neural Classifier for Steam Turbine
Vibration Fault Diagnosis |
H. S. Su, W. J. Dang |
531-383 |
|
An
experimental approach to estimate real-time characteristic of PROFINET IO
versus PROFIBUS DP V2 |
Paolo Ferrari, Alessandra Flammini, Daniele Marioli, Andrea Taroni |
531-243 |
|
A
wideband low-power cascade sigma-delta Modulator Based on the considerations
of integrator settling behaviour |
Yi Yin, Heinrich Klar, Peter Wennekers |
531-165 |
SESSION:
Monitoring Tools and Stability Analysis
Chair:
S. W. Nam, Wen Hou
|
Condition monitoring tool for angular contact ball bearing |
Ahmad Ghanbari, Sohrab Khanmohamadi |
531-680 |
|
Adaptive stabilization of linear time-varying systems |
Manuel A. Duarte-Mermoud, Jorge L. Estrada , Juan C. Travieso-Torres |
531-184 |
|
Establishing calibration models and error envelopes of a 3D whole
body scanning system |
Yu Cheng Lin, Mao Jiun J. Wang, Toly Chen |
531-457 |
|
Stability analysis of a sliding-mode speed observer during
transient state |
Wirote Sangtungtong, Sarawut Sujitjorn |
531-213 |
|
Air pollution monitoring using semiconducting gas sensors and
Internet GIS |
Ornprapa Pummakarnchana, Nitin Tripathi |
531-583 |
SESSION:
Optimizations and Distribution System
Chair:
Sarawut Sujitjorn, Alessandra Flammini
|
The Efficient Search Method for High Risk Events of Power Systems
by Use of Knowledge Bases |
Tetsushi Miki |
531-150 |
|
Multi-objective Design Optimization of MCM Placement |
Ching-Mai Ko, Yu-Jung Huang, Shen-Li Fu, MeiHui Guo |
531-599 |
|
Carbon Nanotube Field Effect Transistors with improved
Characteristics |
Rahim Faez, Seyed Ebrahim Hosseini |
531-294 |
|
Low frequency passive RFID transponder with non-revivable privacy
protection circuit |
M. F. Lu, S. Y. Chang, C. M. Ni, J. S. Deng, C. Y. Chung |
531-175 |
|
High Speed and Large Capacity Solid state recorder for Radar
video signal |
Ren Yongfeng, Zhang Wendong, Li Shengkun, Xu Wenqiang |
531-644 |
|
Study on life management of power transformer |
Zhang Weizheng, Li Yanming, Yang Lanjun, Wang Zhenggang,
Zhang Jinguang, Hu Bo, Kuang Shi |
531-409 |
|
An Extension Of Self-Reconfigurable FSM With Reduced
Reconfiguration Sequences Concept |
Drissa Traore, Mao Zhi Gang |
531-133 |
SESSION:
Studies and Circuits
Systems
Chair:
Wendong
Zhang, Tetsushi Miki
|
The case study of knowledge transfer through computers-making a
subject homepage |
Kuo-hung Tseng, Yao-Ming
Chu, Yao-Yuan Liu, Ya-Lin Li, Chi-Wen Huang |
531-303 |
|
Empirical
study of the q-factor of integrated square spiral inductors on
silicon-on-sapphire |
Bo Yang, Efstratios Skafidas, Rob Evans |
531-598 |
|
The Oscillator Circuit Based on Resonant Tunneling Diodes |
Bo Li, Wengdong Zhang, Chenyang Xue, Xu Li |
531-737 |
|
An effective repair procedure based on quantum-inspired
evolutionary algorithm for 0/1 knapsack problems |
Zhongyu Zhao, Xiyuan Peng, Yu Peng, Enzhe Yu |
531-611 |
|
Investigating the Electric Power Distribution System (EPDS) Bus
Voltage in the Presence of Distributed Generation (DG) |
Hashim Khan, Tahir Mahmood, M.A. Choudhry, Aamir Hanif |
531-561 |
|
The case study on elementary school students’ learning
experiences of computer in subject homepage constructing |
Kuo-hung Tseng, Yao-Ming
Chu, Yao-Yuan Liu, Ya-Lin Li, Chi-Wen Huang |
531-304 |
Tuesday, April 18, 2006
SESSION:
Codes and Security Systems
Chair:
Yuanguo Zhu, J.N. Sheen
|
A memory
efficient FPGA implementation of Quasi-cyclic LDPC decoder |
Jin Sha,
Zhongjin Zhang, Minglun Gao, Li Li, Zhongfeng Wang |
531-249 |
|
High-throughput and memory efficient LDPC decoder architecture |
Jin Sha, Minglun Gao, Zhongjin Zhang, Li Li, Zhongfeng Wang |
531-161 |
|
|
Jin Sha, Minglun Gao, Zhongjin Zhang, Li Li, Zhongfeng Wang |
531-252 |
|
Study on
LZW algorithm for embedded instruction memory |
Abdullah A.
Hussain, Mao Zhigang |
531-419 |
|
High speed
systolic montgomery modular multipliers for RSA cryptosystems |
Ravi Kumar
Satzoda, Chip-Hong Chang, Ching-Chuen Jong |
531-523 |
|
Onset based
optimisation of multi-level mixed polarity Reed-Muller functions |
Yinshui Xia,
Lunyao Wang, Meng Yang, A. E. A. Almaini |
531-494 |
|
Security of
wireless Bluetooth™ sensor systems |
Maria Rizzi,
Michele Maurantonio, Beniamino Castagnolo |
531-709 |
|
Formal
Methodology and Reference Architecture for the integrated development of a
tacit knowledge management system for virtual enterprises |
Victor
Fernandez P., Ricardo Chalmeta |
531-377 |
|
An FPGA
intellectual property authentication scheme through watermarking
techniques |
Chang
N. Zhang, Xiang Xiao, Fajiang Yu |
531-177 |
SESSION:
Artificial Intelligence and Circuits Systems
Chair:
Yinshui Xia,
Maria Rizzi
|
Conditions of convergence in distribution for random fuzzy
variables |
Yuanguo Zhu |
531-340 |
|
A Framework for Parallel Genetic Algorithms on PC Cluster |
Guangzhong Sun, Guoliang Chen |
531-269 |
|
Generalized fuzzy numbers comparison by geometric moments |
J. N. Sheen |
531-135 |
|
A Recommender System Framework combining Neural Networks &
Collaborative Filtering |
Charalampos Vassiliou,Dimitris Stamoulis,Sotiris Athanassopoulos,Drakoulis
Martakos |
531-656 |
SESSION:
Simulations on Circuits and Systems
Chair:
Chip-Hong
Chang, Drakoulis Martakos
|
|
Seyed Ebrahim Hosseini, Rahim Faez |
531-317 |
|
Verifying Bandwidth Control Functions in Real Networking |
Hung-Jen Yang, Jui-Chen Yu, Hsieh-Hua Yang, Ting-Cheng Chang |
531-196 |
|
Effect of finite amplifier gain, bandwidth, and non- idealities of switches
in switched capacitor ladder circuits |
Pragya Varshney, Maneesha Gupta, G. S. Visweswaran |
531-674 |
|
Substitutions and properties of robustness and non-fragility in
controllers |
Guillermo Fernandez-Anaya, Jose Alvarez-Ramirez, Basilio
del Muro, Jose-Job Flores-Godoy |
531-532 |
|
A Circuit Theory Based Load Flow Tracing Method Considering
Counter-Flow Contribution |
Whei-Min Lin, Cong-Hui Huang, Tung-Sheng Zhan |
531-226 |
|
Magnetic fluid acceleration sensor |
Wenrong Yang, Qingxin Yang, Changzai Fan, Suzhen Liu,
Jingfeng Sun |
531-701 |
SESSION:
Applications - Circuits and systems
Chair:
Hung-Jen
Yang, Pragya Varshney
|
Harmonic distortion impact on electro-mechanical and digital
protection relays |
A. Medina, F. Martínez-Cárdenas |
531-295 |
|
Microsystems packaging roadmap for next generation wireless
receivers |
Yasar Amin, Ahsan Ali, Muhammad Zafrullah |
531-723 |
|
The design and test of the single chip integration accelerometer
gyroscope |
Liu Jun, Tang Jun, Shi Yunbo |
531-732 |
|
Development of open mode digital radiographic testing system |
Yaoyu Cheng, Yonghong Li, Limei Su |
531-585 |
|
Simulated Performance Evaluation of a Selective Tracker
Through Random Scenario Generation |
Dil Muhammad Akbar Hussain,
Zaki Ahmed |
531-299 |
|
Analysis of the Substrate Noise Effects for DC-DC Converter Integration in a 0.13μm RF CMOS Technology |
R. M. Vinella, R. Antonicelli, M. Rizzi, B. Castagnolo |
531-678 |